We have extensive experience in manufacturing CO2 Evaporator coils of all types and have been doing so for many years. We can assist with design of your coil to ensure it meets the latest BS EN 378 requirements whether you have a sub or trans-critical CO2 system.
Beehive manufacture to the highest quality levels using heavy duty copper tubing and brazing materials to ensure our coils are fit for purpose. Our testing labs fully test and pass every coil before supply and all are tested to very high pressures in line with the recommendations listed in the BS EN 378 standard.
Our CO2 Evaporators are generally produced for maximum working pressures of 45 or 75 BAR although we can manufacture for working pressures in excess of 100 BAR if your system asks for it!
In addition to the above, we are also actively working 1 on 1 with our tube suppliers to develop more advanced/economic tubing for CO2 coils to give the same strength levels as the heaviest walled material we use but with improved performance and at a cheaper cost. Just speak to our technical department for more information.
We can also offer our Destruction Test facility for customers or end users who would like to see the burst pressures of our CO2 coils first-hand for peace of mind or if required to do so for project sign offs.
"Beehive innovate continuously to ensure we are offering our customers the latest and most economic CO2 technology around."
Water coils are the most straight forward heat exchanger we manufacture but also have the widest variety of uses as chilled water, low pressure hot water (LPHW) units, fan coils, heaters, chilled beams (with or without heating circuits), glycol coils and many more different applications.
Whether the brief is for comfort cooling, specialist multi-stage DX systems or industrial/commercial projects - we can help by selecting units to meet a wide range of temperatures from HVAC to low temperature freezing applications.
Condensing is the act, or practice, of condensation in any form. Condensation is the change of the physical state of matter from gaseous phase into liquid phase, and is the reverse of evaporating.
A chilled beam is a type of convection HVAC system designed to heat or cool large buildings or office spaces. Beehive design and produce two types of chilled beam coils - passive or active.
We have extensive experience in manufacturing CO2 Evaporator coils of all types and have been doing so for many years. We can assist with design of your coil to ensure it meets the latest BS EN 378 requirements whether you have a sub or trans-critical CO2 system.
Steam coils are used in both industrial and HVAC applications and are used to heat air when steam is available. Finned tubes are almost always used in steam coil applications and this type of coil makes use of the latent heat that is released by the steam when it condenses so it is a very effective way of heating air.
All of our units are manufactured to the current PED standards and supplied with a comprehensive warranty and we are also proud to hold the latest ISO 9001:2015 accreditation - enhancing both the quality of our service as well as our products. Please contact us for a copy of our current BSI certificate.
Watch our Video